Welcome guest, Sign in or Register

2016-2021 Civic 1.5L Turbo Inlet Pipe

2016-2021 Civic 1.5L Turbo Inlet Pipe

$372.71
L15-6-306-10

Products in package

2016+ Civic 1.5L TIP Silicone Coupler
Select the intake you intend to use with this 27WON Inlet Pipe
+
Next batch expected October 17th. Pre-order now

Have questions about this product or anything else 27WON related?

TEXT US! 571-271-0271
Add to wish list

Description

Next batch expected October 17th. Pre-order now

One of the most talked-about and sought after performance parts for the 10th Generation Honda Civic is ready. The 27WON Performance Turbo Inlet Pipe is here and aims to take your Earth Dreams powered Civic to a completely new level of bolt-on performance.

Form and Function come together beautifully in our Turbo Inlet Pipe. A precision cast aluminum one-piece design adds a significant “aftermarket” look to your engine bay and provides a big performance increase with its huge 42% larger than OE design.

Combine the Turbo Inlet Pipe with our Hybrid Cold Air Intake system and W1 turbocharger upgrade for the biggest gains and a complete system that truly does REDEFINE the Aftermarket.

All pipes come finished in a durable black powdercoat to not only help resist heat but also provide a long-lasting and sleek look.


27won dare subheadline

27won design subheadline
OEM-honda-plastic-turbo-inlet-pipe-next-to-27WON-aftermarket-unit

This is how you REDEFINE the Aftermarket; Huge cross-sectional area increase, retention of all OEM controls, one-piece construction, and a visual boost that will be breaking necks at every show. *prototype pipe shown

27won unique attributes subheadline serail-number-on-honda-parts-better-than-spoon-performance

Each and every turbo inlet pipe is hand crafted by our production team. To reflect this, we serialize every unit that leaves our shop so that you know you are getting a one of a kind piece that is as unique as the driver that owns it.

more air flow subheadline
graph-showing-more-grams-per-sec-of-upgraded-tip

On an OEM Turbocharger setup the gains from the install of the 27WON Turbo Inlet Pipe (TIP) are small. This is because the factory equipped turbo is so tiny and undersized, it's the bigger flow restriction. Testing across multiple SI trim Civic's showed us an average net gain of 2.2hp and 3.4wtq. These numbers are slightly higher on Base trim models that come from the factory with a much smaller plastic turbo inlet pipe.

It was not until we equipped our CivicX with a W1 turbo drop-in upgrade that the TIP really started to shine in the performance category. The addition of our TIP (aka cross-over pipe) to the larger aftermarket turbo kit netted us over 17 g/s of flow which is huge for such a simple bolt-on part. With the addition of the TIP, we saw horsepower gains of around 9hp.
***Note*** While a tune is not required we recommend one for optimal performance.


pair with a race maf subheadline 27WON-race-maf-bigger-then-PRL

The 27WON Turbo Inlet Pipe works especially well with our 80mm RACE MAF intake for both Si and non-Si options. You can get a 3.14" sized MAF housing as an upgrade to your existing 27WON intake or buy it brand new with full intake systems. When you buy a full 27WON intake system, you'll save over $70.00 by bundling it together with this inlet pipe. Discount applied at checkout automatically.

Order Your Hybrid Cold Air Intake Here


advisory subheadline
big gains subheadline
cutaway-diagram-showing-the-dimensions-of-honda-civic-turbo-pipe

The 27WON Turbo Inlet Pipe increases the inside diameter to 76mm, a 42% increase in cross-sectional area. This drastically improves the efficiency of the intake system resulting in improved airflow through the turbocharger and releasing more power potential for your 1.5L engine.


cast aluminum construction subheadline
27WON-turbo-inplet-pipe-installed-in-2018-honda-civic-si-engine-bay

Due to the extremely complex nature of this part, our requirement to retain the OEM BPV, and our goal for a single-piece design the team here utilized cast aluminum construction for the turbo inlet pipe. This provides a lightweight and simple part for you while allowing for the design flexibility to hit our objectives. *prototype pipe shown

All pieces are manufactured from A356-T6 aluminum and post machined to a precision fit for both OEM, W1 and W2 style drop-in turbo upgrades.

***Note*** All design and testing was completed with an OEM bypass valve (BPV). We cannot guarantee the fitment of our TIP with any aftermarket BPV. Further, we do not recommend one for drive-ability and performance reasons.


hardware and gaskets subheadline 27WON-turbo-inlet-pipe-hardware-and-fittings-laid-out

We pushed the limits with our design and this required that we make changes to both the sealing surface to the compressor and the valve cover breather hose. Good news though, we’ve designed and included all the necessary components for a complete and seamless install.

Mounting studs, gasket, silicone valve cover breather hose, mounting bracket, silicone, and a new wiring harness shrink wrap are all included with the turbo inlet pipe.


power potential subheadline 27WON-turbo-upgrade-with-turbo-inlet-pipe

Our upgraded turbo inlet pipe pairs excellently with our W1 upgraded turbocharger kit. With optimized tuning we saw gains north of 13whp and 14wtq. This testing was performed on a 2018 Honda Civic SI with standard bolt on modifications on pump gas.

With increased flow and less restriction an upgraded T.I.P can help feed the turbo with fresh air and even give a louder induction noise for those looking to make a statement with this upgrade.


27won learn more subheadline

CHECK OUT OUR DESIGN BLOGS BELOW TO SEE HOW WE CREATED THE BEST COMPANION FOR YOUR INTAKE

PART 1:
The OEM tip is a pancake
PART 2:
From Idea to concept
PART 3:
3D prints and prototyping
PART 4:
The final countdown


27won service and support subheadline
  • Limited Lifetime Warranty
  • Designed and machined in Vancouver, WA, in the greater PNW
  • Individual Serial Numbers for every single pipe
  • Full color digital installation instructions. Install app downloads can be found here Play Store and Itunes
  • Free shipping in the lower 48 states and discounted international shipping


Installing Your Upgraded Turbo Inlet Pipe

Difficulty: 3/5

3/5 Difficulty

No CEL

No CEL


Reviews

Nice replacement for the stock inlet pipe look's real nice and it makes your intake sound better too overall I'm happy with the purchased.
Love this product, nice build and fit perfectly. Got it with the intake, looking good under the hood.
my 2020 civic si is well equipped with 27Won the finest aftermarket parts for my Si.. Recently purchased inlet pipe and i gotta say the quality is way better then the OEM one.
Pair this with a PRL Cobra Intake for max turbo noises. Looks way better than the PRL Turbo Inlet Pipe. Good job 27Won!
Install was pretty straightforward. The product is very well made, and is a huge change in the appearance of your engine bay. Coupled with the 27won CAI intake, really ties it all together. This really brings the 1.5t engine up a level in terms of being able to move some serious air into the system, im also connecting it to the 27won W1 turbo... The sound after its tuned, the sound is crazy compared to stock lol... The only thing i can say as a con is it needs something like decals or more... not to big of a grip at all. Overall i love it and when you open your hood people notice and have had only good things to say about it!
One of my favorite parts from 27won. Looks amazing under the hood paired with the 27won intake.
Installed the TIP over a month ago and it looks and makes the turbo sound much louder. As always the instructions are spot on detailed pictures to help the adjustments easier to make it fit into place. Thanks 27won
Installed this TIP when I upgraded to the W1. This piece is extremely high quality and definitely provides more than enough air for the W1. Also paired with the 27Won intake with RACE MAF I wont ever have to worry about airflow being the bottleneck of my system. It also helps steeze up the engine bay and gives you a much better look at the turbo.

If you're upgrading your turbo then this piece is highly recommended to do as well since you need to take the old one out anyways. Pair it with a 27Won intake with RACE MAF while you are at it and save some money and complete that 27won engine bay look!

27Won's products are always top notch and this one is no exception. Better get one when they come back in stock this fall!
Best product ever !!!! Can say many things but honestly guys won’t be able to describe how good this looks and feels in my car definitely worth getting it ..
What a fantastic piece of engineering! Absolutely love this add-on. It not only works but it looks great. 27WON doesn't do anything half-way. The fit, finish and instructions are beyond excellent.
Write a review

Applications


2016-2021 Honda Civic equipped with 1.5L turbo engine
Will work on cars equipped with

  • 27WON CAI
  • PRL street and race CAI
  • PRL street and race SRI
  • AEM, K&N or Injen SRI
  • Mishimoto Intake

Will not work with OEM intake or airbox